Check out Safety Emporium for your N95, N99, and face shield needs.
(Note: This post is 7 years old and may contain outdated information.)
From: misterbill21225 <0000048b89bc676d-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] Magnetic Stirrers in Refrigerators
Date: Thu, 25 Oct 2018 10:17:08 -0600
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 201810251617.w9PGHAbZ015124**At_Symbol_Here**ppa03.princeton.edu
In-Reply-To
Mostly, you'll get sideways of OSHA - cords can't be run through doors.
Sent from my Samsung Galaxy , an AT&T LTE smartphone
-------- Original message --------
From: Mary Ellen A Scott <mas35**At_Symbol_Here**CASE.EDU>
Date: 10/25/18 09:43 (GMT-07:00)
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] Magnetic Stirrers in Refrigerators
Hello,
I
have heard that running a magnetic stir plate inside a refrigerator is
common practice. Usually, the liquid is aqueous and the flask covered.
It is not battery operated unit and the refrigerator door is closed on
the electrical cord. This looks like an accident ready to happen to me.
Should
this practice be continued? Is there any fire code violation involved?
Are there any guidelines for running electrical equipment inside a
refrigerator or a for that matter a cold small cold room?
Thank you,
Mary Ellen
--
Mary Ellen Scott, PhD.
Safety Specialist II, Certified Safety Professional
Case Western Reserve University
EHS - Environmental Health and Safety
Service Building 1st Floor Rm 113
2220 Circle Dr.
Cleveland, OH 44106-7227
216-368-6077
216-368-2236 (Fax)
maryellen.scott**At_Symbol_Here**case.edu"There is no science without fancy and no art without fact" - Vladimir Nabokov
(1899-1977)
Previous post | Top of Page | Next post